In stock     Qty Available: 10-20    

Every time your colour laser printer or multifunction prints a page, a tiny amount of toner is left on the drum. This ends up in the waste toner container, and naturally over time the container gets full and needs to be replaced. Use this genuine Brother WT300CL waste toner pack when your printer warns you it needs a new one. You can be sure of consistent print quality every time when you use Genuine Brother consumables.

Brother recommend using genuine consumables for quality professional prints and for peace of mind, as all genuine Brother consumables are designed as part of an entire printing system and tested to ensure optimum performance and component protection.


Specifications

Product Model: WT300CL
Manufacturer: Brother
Product Type: Waste Toner Bottles
Yield: 50000 pages Yield Information
Price: $66.85 $59.23 inc. GST
Availability: In stock
Suitable for:
  • Brother DCP9055CDN  
  • Brother HL4150CDN  
  • Brother HL4570CDW  
  • Brother MFC9460CDN  
  • Brother MFC9970CDW  
Product Type Description: Every time a laser imaging device prints a page, a tiny amount of toner is left on the drum which is scraped off and deposited into waste toner bottle. Eventually the waste toner bottle fills up and needs to be replaced. Machines will usually stop printing when the waste toner bottle fills up to avoid overflows, and will refuse to print until the bottle is replaced.

No Product Questions yet.

Multifunctions

Replace the waste toner box following the steps below:


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  1. Make sure that the machine is turned on.
     
  2. Press the front cover release button and then open the front cover.

     
    image

     
  3. Hold the green handle of the drum unit. Pull the drum unit out until it stops.


     
    image

     
  4. Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.

     
    image


     

    Caution

    • We recommend that you place the drum unit and/or the toner cartridge on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
       
    • To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.
       
    • Hold the green handles of the drum unit when you carry it. DO NOT hold the side of the drum unit.
     
     


     

    image



     

    Caution

    To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.

     

     

    image

     

     
     
  5. Hold the green handle of the belt unit with both hands and lift the belt unit up, then pull it out.

     
    image


     

    Caution

    To avoid print quality problems, DO NOT touch the shaded parts shown in the illustration.

     

     
  6. Remove two pieces of orange packing material and discard them.

     
    image


     

    Note

    This step is only necessary when you are replacing the waste toner box for the first time, and are not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment.

     

     
  7. Hold the green handle of the waste toner box and remove the waste toner box from the machine.

     
    image


     

    Caution

    Handle the waste toner box carefully in case you accidentally spill or scatter toner. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.

     
     

    Note

    Discard the used waste toner box according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office.

     
  8. Unpack the new waste toner box and put the new waste toner box in the machine using the green handle. Make sure the waste toner box is level and fits firmly into place.
     
    image


     
  9. Put the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place.
     
    image


     
  10. Make sure the green lock lever (1) is in the release position as shown in the illustration.

     
    image

     
  11. Match the guide ends (2) of the drum unit to the right arrow marks (1) on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever.

     
    image

     
  12. Turn the green lock lever (1) clockwise to the lock position.
     
    image


     
  13. Push the drum unit in until it stops.



     
    image


     
  14. Close the front cover of the machine.

 

Printers

To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.

 

image


 




Replace the waste toner box following the steps below:

  1. Make sure that the machine is turned on. Press the front cover release button and then open the front cover.

     
    image


     
    image


     
  2. Hold the green handle of the drum unit. Pull the drum unit out until it stops.

     
    image


     
    image


     
  3. Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine.

     
    image

     
  4. Hold the green handle of the belt unit with both hands and lift the belt unit up, then pull it out.
     
    image


     
    image

     
  5. Remove two pieces of orange packing material and discard them.

     
    image



     

    Note

    This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment.

     

     
  6. Remove the waste toner box from the machine using the green handle.

     
    image

     
  7. Unpack the new waste toner box and put the new waste toner box in the machine using the green handle. Make sure the waste toner box is level and fits firmly into place.

     
    image

     
  8. Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place.
     
    image
     
    image

     
  9. Make sure the green lock lever (1) is in the release position as shown in the illustration.
     
    image

     
  10. Match the guide ends (2) of the drum unit to the right arrow marks (1) on both sides of the machine, then gently slide the drum unit into the machine until it stops at the green lock lever.
     
    image

     
  11. Turn the green lock lever (1) clockwise to the lock position.
     
    image

     
  12. Push the drum unit in until it stops.
     
    image


     
    image

     
  13. Close the front cover of the machine.

When can I expect delivery of my order?

Delivery is usually next business day (in over 92% of cases!) so you will get your order quick. Some customers in remote or far flung destinations may experience some delays but be assured that we will find the quickest way to get your Genuine Brother WT-300CL Waste Toner Pack to you!

Delivery cost is usually $7, but did you know most of our customers don't pay for shipping at all? That's right, all cartridge orders over $99 pay not a cent in shipping costs! Buy this Genuine Brother WT-300CL Waste Toner Pack and more cartridge items to bring your total over $99, or buy 2 of this item, & get FREE Fast Shipping!

How can I pay?

100% Secure
We accept payment by Visa, Mastercard, American Express, Paypal, Direct Bank Deposit and Internet Banking. Wo do not charge extra fees for using your credit card, ever!
Note: Direct deposit payments require clearance before shipment
Our site uses 256bit encryption ensuring your credit card details remain safe.

Genuine Brother WT-300CL Waste Toner Pack

Our Genuine Brother WT-300CL Waste Toner Pack is excellent value and will be delivered to your door super fast!
Brother state that this cartridge is good for at least 50000 pages. Of course this depends on many factors, which is explained here

What type of product is the Genuine Brother WT-300CL Waste Toner Pack?

The Genuine Brother WT-300CL Waste Toner Pack product type is Waste Toner Bottles and is manufactured by Brother.
Every time a laser imaging device prints a page, a tiny amount of toner is left on the drum which is scraped off and deposited into waste toner bottle. Eventually the waste toner bottle fills up and needs to be replaced. Machines will usually stop printing when the waste toner bottle fills up to avoid overflows, and will refuse to print until the bottle is replaced.

We've got everything you need...

The Genuine Brother WT-300CL Waste Toner Pack is just 1 of the 1929 product lines we carry. With such a huge range, you are sure to find all the cartridges you need for other printers you may have. Our superior buying power means we get great savings that we pass on to our valued customers!

Genuine Brother WT-300CL Waste Toner Pack Warranty

Our Genuine Brother WT-300CL Waste Toner Pack is covered by a full manufacturers warranty from Brother! If your Waste Toner Bottles is faulty, please check with us to organise a replacement or refund. See our warranty information page

How secure is Printzone for ordering?

Very secure. Some very important points:

Our site uses the highest level of encryption possible. If you are using a modern browser, communication of sensitive information (your personal details, credit card details etc) is at 256bit - that's the same as online banks and every other reputable online retailer. Our website information, and who we are, has been thoroughly investigated by the secure certificate issuer Comodo. When you are on our secure pages and entering personal information, look for the green URL in the browser bar.

Our website is hosted by a secure data centre in New Plymouth, Taranaki, New Zealand with restricted access and security vetting of all staff. Protected by firewalls and security programs, your information is safe from prying eyes.

We will never sell or trade your personal information. Some websites offer cheaper prices because they act as collectors for your personal information to on sell to third parties for marketing purposes. We will never do this. We only use your personal information to fulfil your order, and will only send you promotional emails if you choose to receive them!

What are the top 10 reasons people buy from Printzone?

  1. Lower Prices
  2. 1929 product lines in stock
  3. 92.2% of orders are delivered next working day
  4. Easy payment options - credit card, paypal, cheque or direct deposit
  5. Heavily secured website
  6. In business since 1999
  7. Real people working in a real store
  8. Toll free contact number
  9. 100% guarantee on all our products
  10. Save your favourites in myCartridges

Order Genuine Brother WT-300CL Waste Toner Pack now

Use the 'Add To Cart' button above to buy now. If online ordering is not for you, but our Genuine Brother WT-300CL Waste Toner Pack offer is too good to turn down, then why not call us on 0800 000 853, and we will handle your order personally.

Thank you for choosing Printzone for your printer cartridges.


Cartridge Finder
Choose Brand


Then Choose Model

Step-by-step Selector
Reviews

Excellent

350 customers have written a review on Trustpilot.

Sample Reviews

Jul 25
excellent
Quick and easy to order and speedy delivery. Great read more
Nadg


Jul 25
Response time
Very fast response time and ink arrived 2 days later read more
Clive


Trustpilot Third Party Reviews
Manufacturers
We Accept